Call Today

 

 

Just how do you really feel in regards to Hot Water Heater Repair?

Lots of modern houses take advantage of an electric water heater for their heater, as a result of its benefit and also ease of use. Nevertheless, much like any other electric appliances, issues might arise with its usage, all of a sudden. It can be actually frustrating to get up to a cool shower instead of a warm one or having your bathroom with water that isn't hot enough and even also hot. Whatever the situation might be, hot water heater problems can be rather aggravating. The good news is, we've made a listing of feasible remedies to your water heater problems. There are a variety of variables that could cause a number of these issues, maybe an issue with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, guarantee you switch off the main power supply for safety. Whatever the issue is, getting it taken care of must not present way too much of an issue if you follow these steps:

 

Inspect Your Power Supply:

As standard as this may seem, it is very required. Without appropriate power, your hot water heater will certainly not operate. So the first thing to do when your water instantly retires is to validate that it isn't a power trouble. Examine if the fuse is burnt out or the breaker stumbled. If the breaker is the concern, merely transform it on and off once more. Change any kind of damaged or damaged fuse. Check the device with power after these adjustments to see if it's currently functioning.

 

Inspect the Burner in the Water Heater:

If it's not a power issue, then try having a look at your heating element if it is still working. Test each of your heating elements to be sure the issue isn't with any of them. If any of them is malfunctioning, change that component and after that inspect whether the hot water is back on.

 

Inspect Your Thermostat:

If your hot water heater still isn't functioning or the water coming out isn't hot enough, you may need to inspect the temperature settings on your upper thermostat. Guarantee the circuit breaker is switched off before doing anything. Open the access panel and press the red switch for temperature level reset over the thermostat. This need to aid warm the water. Transform the breaker back on as well as inspect if the issue has been dealt with.

 

Call A Professional:

If after replacing all faulty components and also resetting your temperature level, the hot water heater still isn't functioning, you may need to contact an expert plumber for a specialist viewpoint. The issue with your heater could be that the hot and cold faucets have actually been changed or it may be undersized for the amount of warm water required in your home. Whatever the case may be, a specialist plumber would help address the trouble.

 

Final thought

Water heater problems are not constantly major. A lot of them result from small problems like a blown fuse or worn-out burner. Changing the defective components must work. However, if you are still incapable to fix the problem, give a call to your nearest plumber ahead to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I was introduced to that editorial about What Would Cause My Electric Water Heater to Stop Working? through a friend on another web page. Sharing is good. Helping others is fun. Thank you for your time. Kindly stop by our site back soon.

Request Appointment